|
|
The model 2050 control head was
designed for the discriminate boat owner who requires a non-corrosive unit that offers dependability, accuracy, and many
years of trouble free service.
This latest addition to the line of Kobelt quality products has a total absence of aluminum
and is made from die cast silicon brass and stainless steel hardware.
The overriding throttle is interlocked and is
only operative when the single lever control handle is in neutral position. When the overriding throttle is moved above idling it
is not possible to engage the gear unless the overriding throttle is limited to approximately 2/3 maximum engine
speed.
This control head has provision for five different connecting points for throttle cable and therefore provides five different stroke
lengths. In order to obtain engine acceleration the cable must be installed to provide a pulling action on the speed
setting device. The clutch control cam is equipped with four different connecting points for the clutch cable. The clutch
cable can be installed to provide either push or pull for forward or reverse direction.
|
