|
The 2061 was designed for reverse gears with provision for
electrical shift from neutral to forward and reverse. The mid
handle position will provide neutral. The two micro switches
controlled by the main cam have a maximum amperage capacity of
5 and an AC voltage of 250.
The speed control cable can be either
of the 30 or 40 series (see ordering information adaptor kits).
There are four different connecting points for the speed control
cable with the maximum strokes as indicated in the drawing.
The travel stop screws will permit reduction of the maximum
handle travel for fine adjustment. This control head is also
equipped with an adjustable detent for all gear positions as
well as an adjustable friction.
|
