Model 7030 Side Mount Steering Cylinder For Outboard Motors

The 7030 Steering Cylinder is intended to be attached to the tilt tube which is equipped with 7/8" NF thread. The 7030 cylinder rod passes through the tilt tube and is screwed on the 7/8" NF thread then locked in position with a setscrew to prevent it from rotating. The regular link supplied by the outboard motor makers is then attached between the tiller and arm and the hole provided at the end of the cylinder rod to steer the outboard motor.

Kobelt Manufacturing also manufactures helm pumps. Ideally, the helm pump for the application is the 7031 which is a fixed displacement pump and provides 2 cu. In. of fluid volume per turn. If more volume at less turns is required, our 7003 and 7005 helm pump can be employed.

The 7030 side mount cylinder is constructed totally in bronze and stainless steel with a hard chromed piston rod and will provide years of trouble-free service.

 

Return to Top

Return to Steering