Model 7085/7085-S Full Power Follow-Up Cylinder
These cylinders are constructed
entirely of bronze and stainless and are available with servo
valve (full follow up) or without. They are also
available in a balanced and unbalanced configuration. If a
single cylinder is not sufficient to provide enough rudder
torque, they can be installed in a twin cylinder configuration
whereby one cylinder would serve as a master (with servo) or 2
plain cylinders can be installed where other means of control
are required. The cylinder is rated at a maximum operating pressure of 1000 psi and
is available in many stock lengths; the cylinder bore
is 3-1/2" and the piston rod is 1-1/2" in diameter.
These cylinders are economically priced and will outperform
any other product in the market place as far as durablility
and savings are concerned.
To see Tiller Arms for this product, click here.
| 
