|
The Kobelt 7201 Auto Pilot Hydraulic Pump is available with
inhoused PC board. The relays on the board are capable of
handling 30 amp current for either rotation. A fuse is
provided for maximum motor load at 30 amp. This is based on
the 12 volt motor. For a 24 volt motor the maximum load is 15
amp and the fuse is installed accordingly.
The center terminal block is for the directional control circuit
and the other blocks are for the power in and power out to the
motor. (The motor leads are internal in the housing).
Please read the 7201 AutoPilot Pump page
to learn about it.
| 
